Liebherr LTM 1095-5.1 - Saan

Next to the normal version that Saan took over from Kreike, are they owning a Liebherr LTM 1095-5.1 in own company colors and a tailing axle.

The crane was used as assist crane by the disassembly of wharf crane "13", where also the cranes LTM 1220-5.2 and the LTM 1400-7.1 were used.

It is a 95 tonne crane with year of manufacture 2008. Because of the trailing axle, the max. weight of the crane is 72 tonnes. That means, the crane is aloud to drive with 23 tonnes of counterweight and the folding jib. without the trailing axle, only 13.6 tonnes can be taken with the crane.

Fitted with 19 meters of folding jib under 40 degrees, a max. of 2 tonnes are now liftable.

The main boom is here fully extended, 58 meters. A hook height of 72 meters can be reached now.

The outrigger base measures 7.4 x 7 meters.

The full counterweight of 23 tonnes can be taken with the crane, the tailswing is 3.85 meters.

Closing with a detail of the trailing axle. Disadvantage of the trailing axle is, the crane gets longer which makes it harder to put the crane in narrow spots.

Back to the Liebherr menu