Terex AC 700 - Huationg (Asia)
The largest mobile crane deployed by Huationg (Asia) from Singapore (SG) is this sharp and impressive Terex AC 700. It is a 700-tonne crane mounted on a 9-axle carrier.
Here was the crane fitted with 120 tonnes of counterweight, that exists out of a 20-tonne base plate with in total ten slabs with each 10 tonnes. The maximum counterweight weights 160 tonnes and the counterweight has a 7.5 meter tailswing.
The undercarriage is powered by a Mercedes-Benz OM 502 LA, an 8-cylinder diesel engine with a power of 480 kW (653 hp). The undercarriage has an 18x8x16-drive line, where the axles 3, 4, 8 and 9 are powered and the axles 1 to 5 and 7 to 9 are steerable.
The outrigger base measures 12.2 x 12.36 meters, or half 9 x 8.75 meters.
A detail of the SSL superlift system. The beams are each folded 30 degrees sideways and give the main boom more stability.
The crane is erected with a short luffing jib. The main boom is here extended 35.5 meters. In the background we can see the Liebherr LTM 1500-8.1 of Huationg (Asia).
Here was the crane fitted with a 42 meter long luffing jib, the maximum length of the luffing jib is 96 meters.
The crane was here lifting a large tube.
A very sharp crane of Huationg (Asia)!
Here is the sharp Terex AC 700 of Huationg (Asia) from Singapore (SG) arriving at the yard in the northern part of the country.
In transit is the crane 20.65 meters long, 3 meters wide and 4 meters tall.
In this configuration is the total mass of the crane approx. 139 tonnes.
Here is the crane parked in the yard again. A very sharp crane of Huationg (Asia)!