Terex AC 100/4L - Bau-Trans

This sharp Terex AC 100/4L of Bau-Trans is registered on their branch in Vaduz (LI). It is the largest crane that is registered in the country.

The 4-axle undercarriage is powered by a 6-cylinder MTU diesel engine with a power of 335 kW (455 hp). This the crane has the optional 8x8x8-drive line, where all axles are powered and steerable.

The outrigger base of the crane measures 8.11 x 7.2 meters, or half 8.11 x 4.72 meters.

A total of 5.4 tonnes of counterweight is stored on the undercarriage during the transport over the road.

In transit is the crane 13.24 meters long, 2.55 meters wide and 3.9 meters tall.

In the box at the rear of the crane are wooden blocks are rigging stored.

Attached to the superstructure remains 4.7 tonnes of counterweight, in total this crane brings 10.1 tonnes of counterweight with it. The full counterweight of the crane weights 26.1 tonnes and has a 3.93 meter tailswing.

The crane is equipped with a 6.8-tonne hoist winch with 18 mm hoist cable.

The 6-part main boom has a 12 meter base length and extends five times to a full length of 59.4 meters. Optionally is the main boom to be extended by a 10.1 or 19 meter long bi-fold swingaway jib. The jib can be installed under a 0, 20 or 40 degree angle to the main boom.

Below the cabin is a rack mounted with additional wooden blocks. A very sharp crane by Bau-Trans!

Back to the Terex menu