Terex AC 100/4L - Asiagroup
This sharp Terex AC 100/4L of Asiagroup from Singapore (SG) was used to lift construction materials onto a roof. It is a 100-tonne mobile crane mounted on a 4-axle carrier.
The undercarriage is powered by a MTU diesel engine with a power of 340 kW (462 hp). The undercarriage has an 8x6x8-drive line, where the axles 1, 2 and 4 are powered and all axles are steerable.
The outrigger base measures 8.1 x 7,2 meters, or half 8,1 x 4,72 meters.
Here was the crane used with 14.2 tonnes of counterweight, the full counterweight weights 25.2 tonnes. The counterweight has a 3.93 meter tailswing.
In transit is the crane 13.2 meters long, 2.55 meters wide and 3.9 meters tall. The crane has a transport mass of approx. 66 tonnes.
At the rear of the undercarriage is another 6-tonne counterweight slab stored. The crane takes by itself 20.2 tonnes of counterweight, but this plate was for this job not required.
The 6-part main boom has a 12 meter base length and extends five times to a maximum length of 59.4 meters. Here is the main boom fully extended.
Optionally is the main boom extendable by a 10.1 - 19 meter long bi-fold swingaway jib. The jib is mountable under a 0, 20 or 40 degree angle towards the main boom.
A very sharp vehicle of Asiagroup!