Scania R 620 - Kukor
The company J. Kukor from Völklingen (DE) is using for the transport of their own drilling rigs this sharp Scania R 620 with 8-axle low loader.
The 4-axle heavy haulage truck has an 8x4-drive line that is powered by a 15.6-liter Scania V8-diesel engine with a power of 620 hp and a torque of 3,000 Nm.
It is a very compact truck, behind the front axle is only the muffler installed. The exhaust is installed vertically behind the cabin.
Behind the cabin is the large equipment tower installed with at the bottom the large diesel tank, in the middle a storage compartment, the battery and the hydraulic oil tank. At the top are the compressed-air tanks installed. On both sides are the sharp V8-logos made.
The largest drilling rigs that J. Kukor is using are two Liebherr LB 36 with a total mass of 115 tonnes. This combination can transport a maximum cargo of 85 tonnes.
At this side is behind the front axle only the AdBlue tank installed.
Attached is a sharp Nooteboom Euro-Px low loader in 3-bed-5 configuration.
A sharp combination!