MAN TGX 26.480 - Tiong Woon

This sharp MAN TGX 26.480 belongs to Tiong Woon from Singapore (SG) and stood with some heavy cargo parked along the road. The combination exists out of a 3-axle ballasted truck with a 12-axle modular trailer.

The truck is this MAN TGX 26.480 with 6x4-drive. The truck is powered by a MAN D2676, a 12.8-litre 6-cylinder diesel engine with a power of 353 kW (480 hp).

Behind the front axle is the diesel tank mounted.

On top of the driven rear axles is a ballast box mounted to give enough pressure on the driven rear axles.

On this side are the muffler, battery, two compressed-air tanks and a smaller storage compartment installed behind the front axle.

Towed is a 12-axle Goldhofer THP/SL 6 platform trailer. The trailer is composed out of two 6-axle modules.

The cargo is a Menck MHU 1200S hydraulic hammer with a total mass of approx. 149 tonnes.

Around 10:00 PM is the transport allowed to move to the other port. A very sharp transport done by Tiong Woon!

A couple of days later I found the truck again doing some oversized transport, here was a long concrete beam transported.

The beam is 40 meters long and weights 75 tonnes.

The beam is loaded on two old Cometto modules, in front on a five-axle module and at the back on a 4-axle module. On the modules are turn tables mounted so that the cargo can rotate against the trailer.

A few moments later is the beam getting unloaded by the Demag CC 2800 of Yew Choon.

Back to the MAN TGX-series menu