On the 30th of April 2013 I was invited to visit Montajes Capamar in Esquiroz (ES). Montajes Capamar letter, seller and (dis)assembler of tower cranes; fast-erecting and top-slewing cranes. The fleet contains about 55 cranes, mainly Spanish produce.
Starting with the fast-erecters, this Liebherr 32 H was erected near the gate.
It is a crane with a 30 metre jib and end-load of 1.1 tonnes.
The max. capacity are 4 tonnes.
A Saez H-32.
With a 32 metre jib, end-load 1 tonne and a max. hoist load of 2 tonnes up to 18.25 meters.
Two Liebherr 26 H.
Two Liebherr 20 H.
The Liebherr H-series are made in Pamplona (ES).
Another 32 H (above) and 26 H.
Also another erected Saez H-32, reach 14.6 metres with the jib folded halfway.
Fitted with 21.58 tonnes of counterweight.
Top-slewers mainly of Jaso, Linden Comansa and Liebherr.
Some stacked Linden Comansa undercarriages.
Stacks of lower weights, counterweights and mast sections.
Trollies and hooks.
The red and white parts are for uses near airports.
Big maintenance is done in-house.
Along the wall the remote controls for the cranes, cabs aren't used that much. On the counterjib of the Linden Comansa LC-5211 is a small maintenance crane build.
A 6.3 tonne Jaso overhead crane in the hall.
A Liebherr 13 H erected next to the hall shows the narrow put-up possibilities.
The Jaso J125 SR is used as yard crane.
This Liebherr 71 EC-B of Montajes Capamar is used by restoration works on the "Santa Maria la Real" cathedral in Pamplona (ES).
Also these Liebherrs 100 LC, 110 EC-B and Linden Comansa NT-45120, used by the construction of a new hospital, belong to Montajes Capamar.