Liebherr LTM 1350-6.1 - Scholpp
This sharp Liebherr LTM 1350-6.1 of Scholpp from Stuttgart (DE) was used by the construction of a high voltage lattice tower near Woringen (DE). On the same construction site was also the Tadano ATF 400G-6 of Mayer in operation.
It is a 350 tonne crane mounted on a 6-axle carrier. The undercarriage is powered by a Liebherr 8-cilinder diesel engine with a power of 450 kW (612 hp). This crane has the standard 12x6x10-drive line, where the axles 1, 3 and 5 are powered and the axles 1 to 3, 5 and 6 are steerable.
The outrigger base of the crane measures 8.93 x 8,53 meters, or half 8,93 x 5,6 meters.
Here was the crane fitted with the maximum counterweight of 140 tonnes, the counterweight has a 5.7 meter tailswing.
The jib sections around the crane were required on the previous job of the crane, there Mayer and Scholpp were working together to replace a rotor blade on a wind turbine in a forest.
The 6-part main boom has a 14.9 meter base length and extends five times to a maximum length of 70 meters. The boom is here extended 50.4 meters, the superlift arms are here unfolded 50 degrees.
Here was the crane used to lift steel construction parts.
A very sharp crane in the colours of Scholpp!