Liebherr LTM 1095-5.1 - Schmidbauer
Schmidbauer is using this sharp Liebherr LTM 1095-5.1 from their branch in Memmingen (DE), here is use for a promotion action for a new store in the same city.
It is a 95 tonne crane on a 5-axle crane carrier.
The outrigger base measures 7.3 x 7 meters, or half 7.3 x 5 meters. At the rear of the chassis is a box attached for spreader woods and some lifting gear. Below the box is a frame attached for four plastic outrigger pads.
In transport mode is the crane 14.1 meters long, 2.75 meters wide and 4 meter high. The transport mass is including 15 tonnes of counterweight around 60 tonnes.
The undercarriage is powered by a 6-cylinder diesel engine with a power of 370 kW (503 hp). This crane has the optional 10x8-drive line where the first axle is also powered. All axles are steerable.
The crane was used here with 15 tonnes of counterweight, the full counterweight is 23 tonnes, that has a 3.85 meter tailswing.
The crane has a 6-part main boom with a maximum length of 58 meters. The boom is extended here 54.4 meters. The boom is optionally with a bi-fold swingaway jib with a 10.5 or 19 meter length, the jib is mountable under 0, 20 or 40 degrees.