Liebherr LTM 1070-4.2 - Peck Tiong Choon
This sharp Liebherr LTM 1070-4.2 belongs to Peck Tiong Choon from Singapore (SG), the crane was used to hoist smaller construction materials on a construction site for an underground sewerage system.
The undercarriage is powered by a Liebherr 6-cylinder diesel engine with a power of 270 kW (367 hp). This crane has the standard 8x4x8-drive line, where both rear axles are powered and all axles are steerable.
The outrigger base measures 8 x 6,3 meters, or half 8 x 4.5 meters.
The full counterweight of the crane weights 14.5 tonnes and has a 3.46 meter tailswing. This crane is fitted with the optional second winch, the tailswing of the second winch is 3.98 meters. The winches have each a 5.7 tonne line pull.
Peck Tiong Choon deploys multiple mobile cranes up to a lifting capacity of 800 tonnes.
The 6-part main boom has an 11 meter base length and extends five times to a maximum length of 50 meters. The main boom can be extended by a bi-fold swingaway jib with a length of 9.5 or 16 meters, mountable to the main boom head and adjustable under load in an angle between 0 and 60 degrees.
Here is the main boom extended to a length of 21.8 meters. A sharp crane of Peck Tiong Choon!