Liebherr LTM 1070-4.2 - PEC
This sharp Liebherr LTM 1070-4.2 belongs to PEC from Singapore (SG). It is a 70-tonne telescopic crane mounted on a 4-axle carrier with year of manufacture 2012.
PEC is an industrial contractor with a fleet of cranes which are mainly used in the petrochemical sector.
The 4-axle carrier is powered by a Liebherr 6-cylinder diesel engine with a power of 270 kW (367 hp). This crane has the standard 8x4x8-drive line, where the axles 3 and 4 are powered and all axles are steerable.
The outrigger base measures 8 x 6.3 meters, or half 8 x 4.5 meters.
Attached to the superstructure is the full counterweight of 13.8 tonnes, with a 3.46 meter tailswing. This crane is fitted with the optional second winch, the winch has a 5.7-tonne line pull. The second winch has a 3.975 meter tailswing.
The six-part main boom has an 11 meter base length and extends five times to a maximum length of 50 meters. Here is the main boom extended to a length of 18.2 meters.
Optionally is the main boom to be extended by a bi-fold swingaway jib. This jib has a 9.5 / 16 meter length and can be adjusted in an angle between 0 to 60 degrees by use of an hydraulic system.
In transit is the crane 13.035 meters long, 2.55 meters wide and 3.9 meters tall. This crane has a total mass of approx. 52 tonnes.
At rear of the carrier are the outrigger plates stored, at the rear of the chassis is also a large storage box mounted. A very sharp crane of PEC!