Liebherr LTF 1060-4.1 - Knaack-Krane
This sharp Liebherr LTF 1060-4.1 of Knaack-Krane from Hamburg (DE) stood prepared for delivery on the yard of Liebherr in Ehingen (DE). It is a 60-tonne telescopic crane mounted on a 4-axle MAN chassis.
The crane has a 5-part main boom with a base length of 10.2 meters and extends four times to a maximum length of 40 meters. The main boom can be extended with a 9.5 or 16 meter long bi-fold swingaway jib.
The LTF 1060-4.1 is mounted on a MAN TGS 41.460 chassis with 8x4-drive lines. The truck is powered by a MAN 12.4-liter 6-cylinder diesel engine with a power of 343 kW (460 hp). With this 8x4-drive line are the two rear axles driven, the two front axles are steerable.
In transit is the crane 11.35 meters long, 2.55 meters wide and 3.96 meters tall. The transport mass depends on the chassis and configuration and is about 42 tonnes.
The X-shapped outriggerbase measures 6.95 x 6.84 meters, or half 5.77 x 5.03 meters. During the transport over the road are the front outriggers folded backwards. On the undercarriage is 7 tonnes of counterweight stored.
On the superstructure remains 2.2 tonnes of counterweight. This LTF 1060-4.1 takes 9.2 tonnes of counterweight with it, the full counterweight is 10.2 tonnes. The counterweight has a tailswing of 3.5 meters. The hoist winch has a line pull of 4.5 tonnes.
A very sharp crane in the Knaack-colours! This company is deploying cranes up to 750 tonne lifting capacity, all cranes in the fleet come from Liebherr.