Liebherr LTM 1350-6.1 - Bok Seng
Bok Seng from Singapore (SG) deployed this interesting Liebherr LTM 1350-6.1, here used near the city centre of Singapore to hoist a transformer. It is a 350-tonne crane with year of manufacture 2014.
The carrier is powered by a Liebherr 8-cylinder diesel engine with a power of 450 kW (612 hp). This crane is fitted with the standard 12x6x12-drive line, where the axles 1, 3 and 5 are powered and all axles are steerable.
The outrigger base measures 8.932 x 8.53 meters, or half 8.932 x 5.6 meters.
The superstructure is powered by a Liebherr 4-cylinder diesel engine with a power of 180 kW (245 hp). The crane is fitted with a 12.2-tonne hoist winch.
Here was the crane configured with the full counterweight of 140 tonnes. The counterweight has a fixed tailswing of 5.7 meters.
The crane has a six-part main boom. The base length is 14.9 meters and the main boom extends five times to a full length of maximum 70 meters. Here is the main boom extended to a 35.2 meter length, the struts of the YSL-boom guying are each unfolded 50 degrees.
Bok Seng was also responsible for the transport of the 26 tonne transformer.
The transformer with a 26 tonne mass is lifted at a radius of approx. 26 meters.
In transit is the crane 17.743 meters long, 3 meters wide and 4 meters tall. The transport mass of the crane in this configuration is approx. 88 tonnes. A very sharp crane of Bok Seng!